Hammer Metals (ASX:HMX) reports it has completed a preliminary ore sorting testwork on samples taken from the Kalman Cu-Au-Mo-Re Deposit, located 60km southeast of Mt Isa in Queensland.
The company says the testwork was conducted by Steinert at its Bibra Lake facility utilising a combination of 3D laser and x-ray sensors to differentiate inputs into waste and those matching parameters of target elements. These two sensors were utilised to tailor an optimum combination for specific mineralisation mineralogy.
Hammer reports the aim of this trial test work was to determine whether ore sorting technology could be applied to ore from the Kalman Deposit, and the ‘favourable’ initial results give the company confidence to embark on a larger program of testwork.
Samples were taken from K-23A and consisted of half core, and 4 samples representing distinct ore zones were taken based on whether ore was dominantly copper or molybdenum rich. Overall the company says these samples combined, provide a representative sample of Kalman’s copper, gold, molybdenum and rhenium resource grades.
Hammer Metals Managing Director Daniel Thomas said this is a tremendous result from early-stage test work and shows that the Kalman deposit is amenable to ore sorting technology.
“Processing costs can represent a significant proportion (over 50%) of overall production costs and reducing the amount of sub-economic material going through a grinding and floatation circuit could significantly increase project returns.
Similarly, an increased head grade through the grinding and floatation circuit may lead to significant capital savings by reducing the required throughput capacity of the plant.
“It was pleasing to see the copper and molybdenum ore domains both behave in a similar manner to the same sort algorithm”
It was pleasing to see the copper and molybdenum ore domains both behave in a similar manner to the same sort algorithm. The overall benefits of ore sorting will not only apply to reduced operating and capital costs, but are also likely to result in an expanded resource when the upgrade factors are applied within the Kalman resource model.
It is an exciting time for the Kalman Project as we embark on further shallow extensional drilling. Successful drilling and learning from the ore sorting test work will enable Hammer to review and upgrade the existing resource model.”
Hammer reports the samples were transported to Western Australia and crushed to 10mm to 31.5mm, and before combining the samples, each sample was scanned separately using the combination sensor sorter taking measurements for all four sensors. The scan data was used to develop a bespoke combination of XRT and 3D laser sort program.
Given the similarity in the nature of the copper ore and each response to the initial scan, samples KMET01 and KMET03 were combined, and the company decided that KMET04 which was molybdenum rich was processed separately.
Steinert ran the material through the ore sorting test rig in multiple passes to examine the sensitivity of Kalman ore to various settings, and multiple passes of each sample were conducted to examine mass reduction and beneficiation.
Utilising the same sorting program, the behaviour of the 2 samples KMET101-2 and KMET04 was similar, indicating the suitability of the ore sorting technology to be applied across the Kalman deposit.
Hammer says the results indicate that over 80% of the combined value of the ore can be recovered with a 40% to 45% reduction in mass processed, and specifically the ore sorting setting of rejecting low density material could achieve a copper grade increase of 28% (0.71% to 0.91% Cu) with a mass reduction of 35% and recovery of 83.4%.
They also achieved a gold grade increase of 39% (0.23g/t Au to 0.32g/t Au) with a mass reduction of 35% and recovery of 90.7%, and a molybdenum grade increase of 103% (0.33% to 0.67% Mo) with a mass reduction of 61.8% and a recovery of 76.6%.
Hammer reports the initial work indicates that the Kalman deposit is very amenable to ore sorting and that bulk testwork should be undertaken.
The company is reviewing the initial ore sorting testwork results and identifying zones within the Kalman Deposit which could be utilised in a more expansive program, and is also these results in the context of potential changes in resource modelling in combination with potential scale decisions for a future scoping study on project.
A review of the resource model is likely to be considered post the completion of the upcoming extensional drilling.
Hammer Metals is an active mineral explorer focused on discovering large copper-gold deposits of Ernest Henry style and has a range of prospective targets at various stages of testing.
The company wholly owns the Bronzewing South Gold Project located adjacent to the 2.3 million ounce Bronzewing Gold Deposit, the Kalman Cu-Au-Mo-Re deposit, the Overlander North and Overlander South (Cu-Co) deposit.
Images: Hammer Metals Ltd
