From pit to poured bar.
Context and background
Gold occupies a unique place in the mining industry. Prized for millennia, traded globally in a matter of seconds, and subject to more retail investor attention than almost any other metal. But the process of getting it out of the ground and into a tradeable form is less widely understood than the metal’s reputation might suggest.
The path from ore in the ground to a finished gold bar involves several distinct stages, each carrying its own costs and technical requirements. Understanding that process gives useful context for reading mine production announcements, interpreting cost disclosures, and making sense of why some gold operations are more profitable than others at the same gold price.
Mining the ore
Open-pit mining accounts for roughly 60–70% of global gold production by volume. The method suits large, low-grade deposits where mineralisation is spread across a wide area at accessible depths. Excavators and haul trucks work in descending benches, moving both ore and waste rock in a continuous cycle. The economics depend on scale: because the gold grades involved are often modest, commonly between 0.5 and 1.5 grams per tonne of ore, enormous volumes of material need to be processed to produce meaningful quantities of metal.
Underground mining handles the rest and typically targets higher-grade ore bodies where the gold is more concentrated but the deposit is too deep or too narrow to justify the cost of stripping an open pit above it. Underground gold mines use a range of methods depending on orebody geometry: long-hole open stoping for wider, more continuous zones; cut-and-fill for irregular ore shapes; and block caving for large, deep orebodies that can be progressively collapsed from below. Underground operations generally carry higher costs per tonne than open-pit mines, but the higher grades they target mean more gold per tonne processed, which can make the economics work.
Many gold mines use both methods simultaneously, mining open-pit ore from the upper portion of a deposit while developing underground access to higher-grade material at depth. This staged transition is common in the Goldfields region of Western Australia, where numerous operations have evolved from surface to underground over their production lives.

Crushing, grinding, and liberating the gold
Once ore reaches the processing plant, the first objective is to break it down finely enough that gold particles are liberated from the surrounding rock. Primary crushers reduce large ore chunks to manageable sizes; subsequent grinding stages, using SAG mills and ball mills, reduce the material further to a fine powder. The target particle size depends on the ore characteristics and the processing method to follow. Finer grinding improves gold recovery but consumes more energy and adds to operating costs.
Gold ores vary significantly in how readily they give up their gold, and this is one of the more important variables in a project’s processing economics.
Free-milling ores, where gold particles exist as discrete grains not locked within sulphide or other host minerals, are the most straightforward to process. Gold can be recovered relatively easily using cyanide leaching, without needing more complex treatment first. Refractory ores are considerably more difficult: the gold is locked within sulphide minerals, particularly pyrite and arsenopyrite, and won’t respond to direct leaching until the host minerals are broken down. Refractory ores require pre-treatment before conventional leaching can work.
Cyanide leaching: the dominant recovery method
The workhorse of modern gold processing is cyanide leaching, a chemical process in which a dilute sodium cyanide solution is used to dissolve gold from ground ore. Gold forms a soluble complex with cyanide in the presence of oxygen, which allows it to be extracted from material that would otherwise yield very little gold through physical separation alone.
The process takes two main forms. In carbon-in-leach (CIL) and carbon-in-pulp (CIP) circuits, ground ore is mixed with cyanide solution in a series of large, agitated tanks. Activated carbon is added to adsorb the dissolved gold, then the loaded carbon is stripped, and the gold is recovered by electrowinning. This approach suits higher-grade ores being processed in a conventional mill circuit.
Heap leaching is used for lower-grade ores where the economics of fine grinding and tank leaching wouldn’t stack up. Crushed ore is stacked in large heaps on lined pads, and cyanide solution is drip-irrigated across the surface, percolating through the heap and dissolving gold as it goes. The gold-bearing solution is collected at the base and processed through an activated carbon or Merrill-Crowe circuit to recover the metal. Heap leaching is slower and typically achieves lower gold recoveries than tank leaching, but its lower capital and operating costs make it viable for ore grades that conventional processing couldn’t handle economically.
Refractory ores and pre-treatment
For refractory ores, additional processing steps are needed before leaching can work. The three main pre-treatment methods in commercial use are roasting, pressure oxidation (POX), and bio-oxidation.
Roasting passes sulphide ore through a high-temperature furnace, burning off the sulphide minerals and oxidising the host material to expose the locked gold. Pressure oxidation achieves a similar result using high-pressure steam in an autoclave, breaking down sulphide minerals under controlled conditions without the atmospheric emissions associated with roasting. Bio-oxidation uses naturally occurring bacteria, typically Acidithiobacillus ferrooxidans, to oxidise sulphide minerals at ambient temperatures over a longer period. Russia’s Olimpiada mine, one of the world’s largest gold operations, uses a proprietary bio-oxidation technology to treat its highly refractory ore.
Each method adds capital cost and complexity, which is why refractory deposits typically carry higher processing costs than free-milling equivalents at similar grades. A Feasibility Study for a refractory project deserves particular attention to the pre-treatment assumptions since recoveries and costs in this area are where project economics can diverge most significantly from initial estimates.

Smelting and the doré bar
After gold is recovered from the leach circuit — whether through carbon stripping, electrowinning, or Merrill-Crowe precipitation — it goes through a final smelting stage at the mine site. The gold-bearing material is melted in a furnace alongside fluxes that help separate impurities, and the molten metal is poured into moulds to produce doré bars.
Doré is an alloy of gold and silver, along with trace quantities of other metals, produced at the mine in semi-pure form for shipment to a refinery. Gold content in doré varies considerably, typically ranging from around 50% to 95% depending on the orebody and processing method, so doré is not yet the standardised, market-ready product that trading and investment require. Doré bars are weighed and assayed at the mine, then transported to an accredited refinery for final processing.
Refining to Good Delivery standard
At the refinery, doré is processed through either the Miller chlorination process or the Wohlwill electrolytic process to remove remaining silver, base metals, and other impurities. The Miller process bubbles chlorine gas through molten gold and is faster, producing gold with a purity of about 99.5%. The Wohlwill process uses electrolysis to achieve purities of 99.99% and above, for applications where a higher level of fineness is required.
The finished product, in its institutional trading form, is a gold bar meeting the London Bullion Market Association’s Good Delivery standard. LBMA Good Delivery bars must have a minimum fineness of 99.5% gold, weigh between 350 and 430 troy ounces (around 10.9–13.4kg), and carry the refiner’s stamp, serial number, year of manufacture, declared fineness, and gross weight. This is the standardised form in which gold enters the global wholesale market, is held in central bank reserves, and settles transactions between institutional participants. The Perth Mint is one of a relatively small number of globally accredited LBMA Good Delivery refiners, making it an important part of Australia’s gold industry infrastructure.
What this means for investors
The processing route, ore type, and recovery method all feed directly into a mine’s cost structure. All-in sustaining costs (AISC), a standard measure of the cost of producing an ounce of gold that includes sustaining capital, can vary significantly across operations depending on ore grade, processing complexity, and infrastructure requirements. An open-pit heap-leach operation processing low-grade ore in a favourable location can achieve AISC well below the industry average, while an underground refractory operation with complex pre-treatment and remote infrastructure might sit considerably above it.
When a company reports production results or updates its cost guidance, understanding which processing route the operation uses gives useful context for assessing whether the cost trajectory makes sense and where the risks sit. Recovery rate is the other variable worth watching: a mine consistently achieving 92% gold recovery is performing meaningfully better than one at 78%, all else being equal, and divergence from Feasibility Study recovery assumptions is one of the earlier signals of processing underperformance.
Conclusion
Gold mining spans a series of stages: open-pit or underground extraction, crushing and grinding, cyanide leaching or more complex refractory pre-treatment, smelting to produce doré, and final refining to LBMA Good Delivery standard. Each stage adds cost and complexity, and the choices made during the processing design stage directly affect a mine’s economics over its production life. Understanding this chain from ore to poured bar gives investors a more grounded basis for interpreting production announcements, evaluating processing risks in feasibility studies, and comparing operations across the gold sector.
Write to Tyler Jefferson at Mining.com.au
Main image: Wikimedia Commons



